Zero's One's

This is an article about my graduation project, We worked in insufficient resources (money and time), No perfect work should be expected here. Team A post shared by Ammar Atef (@ammar.atef45) on Jul 12, 2017 at 5:21pm PDT Idea The idea is to build a CNC with servo motors instead of steppers, Servo CNC's can be better than stepper or vice versa depending on the many parameters, But the idea of the project is to test if we can control and model it from scratch. Result This playlist has 12 videos of tests we made to get some results, some are successful, and some aren't. Book You can download the book from here[link] , I think everything is well described, You can always contact me for more explanation.

This is tutorial to help you understand ultrasonic and buzzer and go deeper into learning Arduino, follow these steps and give me feedback please. 1. Prepare your material and tools 1. Test Board 2. Ultrasonic sensor 3. Arduino cable 4.  +5V buzzer 5. Male to male pins 6. Arduino uno board Tools and materials are shown in the pics 2. Connect your circuit          Connect the Buzzer positive terminal to the Arduino pin 2 and the negative terminal to the Gnd.          Connect the VCC pin of ultrasonic to +5v pin and the Gnd to the ground.          Connect trig pin to pin 10 and echo pin to pin 9.          The pictures shows you the connection.  3. Load the code to your Arduino          You can find code in codebender.cc here , it is well described a...